FlexiPress

Standard Models Data Sheet

FlexiPress - frame only excluding power unit
MODEL     FP16 FP25 FP40 FP60 FP100 FP125 FP150 FP200
Pressing force, max.   tons 18 28 45 67 112 138 165 220
Max. stroke (standard machine)   inch 11-3/4 11-3/4 11-3/4 11-3/4 11-3/4 11-3/4 11-3/4 11-3/4
Minimum daylight A inch 6 6 7 8 9-1/2 13 11-3/4 11-3/4
Maximum daylight B inch 35 31 32 27-1/4 29-1/4 33 29-1/2 29-1/2
Width between uprights l-r C inch 25-1/2 29-1/2 33-1/2 39-3/4 42-1/2 42-1/2 45-1/4 45-1/4
Overall frame width D inch 31 36 41 50 57 57 59-1/2 61
Clearance between vertidcals f-b F inch 6-1/4 7-3/4 9-1/2 11-1/2 14 14 16 19
Length of feet H inch 22 23 24 30 32 32 38 41
Overall height K inch 72 71 76 78 89 89 98 1/2 98-1/2
Bed height - max L inch 43 40 43 42-3/4 46 46 48 48
Width between upright holes M inch 6 x 5 5X5 5X5 4X5 4X5 4X5 3X6 3X6
Lateral cylinder movement (optional) P inch 8-7/8 10 10-3/4 13 13 13 13-3/4 12-1/2
Nose cap S inch 2 2 3/8 2 1/2 3 3/8 4 –- – –
Hole picth, press flange T inch 2-5/8 3 3 3/8 4 3/8 5 6 8 1/4 8-1/4
Hole diameter, press flange U 2xØ inch 2xØ 11/32 2xØ 11/32 2xØ 7/16 2xØ 1/2 2xØ 11/16 4xØ 3/4 8xØ 3/4 8xØ 3/4
Thickness, press flange V inch   3/4 1 1-1/4 1-1/2 1-3/4 1-3/4 2-5/8 2-5/8
Diameter, press flange X 0 inch 3-3/8 3-7/8 4-1/4 5-1/4 6-1/4 7-1/2 10 10
Netweight, app   lbs. 400 550 1000 1655 2645 3100 3500 4600
Hand Pump Unit for FlexiPress
MODEL   16H 25H 40H 60H 100H
Width
01
 inch 6-3/8 6-3/8 6-3/8 6-3/8 6-3/8
Lifting force at 73 psi lbs. 220 550 990 1540 2425
Oil reservoir capacity gal. 3-5/8 3-5/8 3-5/8 3-5/8 3-5/8

Motorised Pump Unit for FlexiPress
MODEL     16M 25M 40M 60M 100M 125M 150M 200M
Width
02
 inch 11 11 11 11 11 11 11 11
Approach speed/pressing speed, IPM inch/min 28/28 28/28 28/28 28/14 28/11 23/9 28/9 25/6
Return speed, IPM inch/min 52 41 35 41 36 28 62 40
Ram pulling force tons 3,3 3,3 3,3 3,3 3,3 16,5 22 22
Motor 220/440V, 3 ph, 60cy HP 3 3 3 3 3 3 4 4
Oil reservoir capacity gal. 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 9 9

Optional Extras for FlexiPress

A T-slotted press bed. B Laterally moving cylinder. C Increased stroke length. D Special motorized power unit.

Specification/order code:


Home | FlexiPress | C-Frame Bench Press | ClassicPress | LUX Series | Hydraulic Die Try-Out
LP Presses | AutoPress H-Frame | COMPAC C-Frame Series


• Email: Skulmachy@aol.com • (310) 538-2048 • Fax: (310) 756-1050 • www.skulsky.com • 17500 S. Denver Ave, Gardena, CA 90248 •