FlexiPress

18T STENHØJ Broaching Press with a 23-1/2" Stroke Length

 

The press has an extra long stroke of 23-1/2" and is equipped with a single hand operated 1 or 2-stage unit, with infinite adjustment of the ram speed proportional to hand control value lever position. The press is also provided with a separate adjustment value for infinitely setting of the pressing force.

The press table is raised and lowered hydraulically by use of the D/A RAM with a lifting yoke and locked at the required position by safely steel locking pins.

Pressing force
Return force
Stroke 		18 Tons
3 Tons
23-1/2"
Daylight, max.
Daylight, min.
Table width between verticals		 35"
6"
25-1/2"
Pressing speed as per safety regulations
Return Speed		 32ipm Approach (Variable)
32ipm Pressing (Variable)
52ipm Return
Power unit 3 HP
Application:
This press is specially designed and used for broaching operations.

Serving those who create precision metal products using stamping, fabricating and other value-added processes.

 

Home | FlexiPress | C-Frame Bench Press | ClassicPress | LUX Series | Hydraulic Die Try-Out
LP Presses | AutoPress H-Frame | COMPAC C-Frame Series

• Email: Skulmachy@aol.com • (310) 538-2048 • Fax: (310) 756-1050 • www.skulsky.com • 17500 S. Denver Ave, Gardena, CA 90248 •